2007 Toyota Tundra Oil Light Reset

This indicator can only be reset by a Toyota delear. Turn the ignition key to the OFF position with the odometer reading shown.

Maintenance Required Reset 2007 Toyota Tundra Youtube

Push and hold the TRIP reset or MODE button.

2007 toyota tundra oil light reset. Allow the light to blink ON and OFF for a few seconds then release the reset button and turn the ignition OFF. The procedure is applicable to the second-generation Toyota Tundra pickup truck 2007 to 2010. All information how to reset low engine oil pressure warning light is taken from Toyota Tundra 2 generation owners manual.

Hold knob for at least 5 seconds until 000000 is displayed and light turns off. Make sure odometer is displayed and turn the ignition off. Mine will start run for about 5 seconds and then shut off.

Noticed that the low oil pressure light oil can under the oil pressure gage is on. The system must be reset after the engine oil replacement. Go to the Settings menu by using the navigation button.

But one thing Ive noticed is that if you keep it in park and hold the gas pedal down for about 10s to 3000-3500 rpms it will overide the AT oil temp light and stay running. It may ruin the engine. Hold down the knob for atleast 5 seconds.

For your information this process will work the first and second generations of the Toyota Tundra 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013. Turn the ignition to run one position before starting engine. To reset automatic transmission fluid temperature warning light on your Toyota Tundra ypu must stop the vehicle at a safe place and put the selector lever in P.

Reset the system by the following procedure. Ensure odometer reading is shown. Only show this user.

Oil Change Light Reset Toyota Tundra 2005 2006 2007 2008 Procedure. Turn the ignition to the On position but do not start the engine. Turn on the car without starting the engine.

If youve done it right the maintenance light will turn off. 2007-2010 Tundra Maintenance Light Reset Oil Change Light Maintenance Light Fix It Friday - YouTube. While holding reset button switch ignition to ON position.