2007 Toyota Tundra Tire Pressure Sensor Reset

How do I reset my low tire pressure warning light. Turn the engine switch to the ON position and wait some minutes.

How To Reset Tire Pressure Warning Light On Toyota Tundra Youtube

Start the car and wait 20 minutes for the sensor to refresh.

2007 toyota tundra tire pressure sensor reset. Say 45 all around. So short and sweet. Each model year has a different button location.

I held the TPMS reset for 3 or 5 seconds and it kept blinking. I refilled the tires turned the key to ON. Bought a new tire to replace it.

Turn the ignition switch OFF. How to reset TPMS on Page 2 How To Use The Reset Button. Start the engine and keep the vehicle in PARK.

Relearn Procedure when Resetting the Tire Pressure or after Rotating the Tires select models. The Toyota Tundra uses a direct TPMS system which means TPMS sensors are installed in the wheel. The dealer has to do it or someone with techstream software.

The temperature dropped and the tire pressure light came on solid. Make sure your tire pressure matches whats is printed on the drivers door jam. If this occurs reset procedure must be repeated from the beginning.

Press and hold the tire pressure warning reset switch until the tire pressure warning light blinks 3 times at one-second intervals. Connect the scan tool to the OBDII port and upload the sensor IDs. Push and hold the reset switch until the low tire pressure warning light blinks three times.

The light stayed off for about 50 milesand came back on. When the tire is filled or if the tires are changed or rotated the tire-pressure sensors must be reset to turn off the warning light and reinitialize the system. Wait for several minutes with the engine switch in the ON position to allow the system to record each tires pressure then turn the engine off.

Also check your spare tire. Before initializing set the tire pressure within the specified range. Look for the TPMS reset button and press the button until the tire pressure indicator Blinks slowly three times.